HearCoil | Wired T-Coil Neckloop for Hearing Aids

Connect any receiver with a standard 3.5 mm audio output to telecoil-enabled hearing aids using this simple wired neckloop. Wear HearCoil around your neck, plug it into the receiver, and switch your hearing aids to an enabled T or MT program.

Product Highlights

• Made for T-Coil Hearing Aids: Sends audio from a connected receiver to telecoil-equipped hearing aids using an enabled T or MT listening program.
• Works with Standard 3.5 mm Receivers: Compatible with receivers and listening devices that provide a working 3.5 mm audio output.
• Recommended with AuraClip and AuraView: Pair with the Avantree AuraClip VRC-240 or AuraView VRC-250 for a complete Avantree listening setup.
• Simple 3-Step Setup: Plug HearCoil into the receiver, wear the loop around your neck, and switch your hearing aids to T or MT mode.
• No Buttons or Charging: HearCoil has no battery or on-device controls. Adjust volume on the receiver or your hearing aids.

How It Works

Audio source or Auracast broadcast → compatible receiver with 3.5 mm audio output → HearCoil wired neckloop → T-coil hearing aids.

Specifications

Before You Buy

Your hearing aids must contain a telecoil and have an enabled T or MT listening program. Some telecoil-equipped hearing aids do not show this program until it is enabled by a hearing care professional.

Frequently Asked Questions

Will HearCoil work with my hearing aids?

It works with hearing aids that have a telecoil and an enabled T or MT program. Hearing aids without telecoil support are not compatible.

Which receivers can I use?

Use a receiver or listening device with a working standard 3.5 mm audio output. AuraClip VRC-240 and AuraView VRC-250 are recommended, but HearCoil is not limited to those models.

My hearing aids support T-coil, but I cannot find T or MT mode. What should I do?

Contact your hearing care professional or audiologist. The telecoil program may need to be enabled or added to your hearing aids.

How do I set it up?

Plug HearCoil into the receiver’s 3.5 mm audio output, wear the loop around your neck, and switch your hearing aids to T or MT mode.

How do I change the volume?

HearCoil has no buttons or volume controls. Adjust volume on the connected receiver or on your hearing aids.

Does it need batteries or charging?

No. HearCoil is a passive wired accessory and does not contain a battery.

What is included?

One HearCoil wired neckloop. Receiver and hearing aids are sold separately.