How To Connect Beats Headphones To TV?
Connecting Beats headphones to a TV requires Bluetooth compatibility or auxiliary audio interfaces. For Apple TV users, seamless pairing occurs via control center using matching Apple IDs. Non-Apple TVs need Bluetooth discovery mode activation or a wired 3.5mm/RCA connection. Avantree’s Bluetooth transmitters like the HT4186 offer reliable wireless bridging for non-Bluetooth TVs, ensuring low-latency audio sync.
How to Connect Beats Headphones to Avantree TransmittersHow do I pair Beats with Apple TV?
Use the Apple TV control center to connect Beats via shared Apple ID authentication. Hold the TV remote’s button to access settings, select your headphones, and confirm pairing. Pro Tip: Disable “Suggest Nearby AirPods” in Bluetooth settings if unwanted prompts appear during movie nights.
For Apple TV integration, ensure both devices use the same iCloud account. Hold the remote’s Home button > Control Center > Audio Output > Choose Beats. This automatically mutes TV speakers. If your Beats won’t appear, reset them by holding the system button for 15 seconds until LEDs flash red/white. For example, Beats Studio Buds paired to Apple TV 4K allow spatial audio if supported.
Can I connect Beats to non-Apple TVs?
Yes, via Bluetooth or wired adapters. Activate TV’s Bluetooth discovery, then put Beats in pairing mode. For TVs without Bluetooth, use Avantree’s HT4186 transmitter or 3.5mm-to-RCA cables.
Navigate to your TV’s audio settings (Sony: Settings > Network & Accessories > Bluetooth; Samsung: Sound > Sound Output > Bluetooth). Hold your Beats’ power button until the LED blinks, then select them from the TV’s device list. Practically speaking, some budget TVs lack native Bluetooth—Avantree’s transmitters convert optical/HDMI-ARC outputs to Bluetooth 5.0 for lag-free streaming. Why struggle with compatibility? A $30 transmitter often solves connectivity hurdles better than factory-installed chips.
| Method | Latency | Cost |
|---|---|---|
| Native Bluetooth | 100-300ms | Free |
| Avantree Transmitter | <40ms | $25-$60 |
How do wired connections work?
Use 3.5mm aux cables or RCA adapters for analog audio. Connect Beats’ included cable to the TV’s headphone/audio-out port.
Locate your TV’s audio output—often labeled “Audio Out” or “Headphones.” For older TVs with RCA jacks (red/white), use a 3.5mm-to-RCA adapter ($8 on Amazon). Pro Tip: Enable “Audio Passthrough” in TV settings to bypass internal processing delays. While wired, your Beats become dumb speakers—no volume controls or mic functionality. It’s like using a landline in a Wi-Fi era: reliable but limited.
Why won’t my Beats connect to the TV?
Common issues include incompatible codecs, low battery, or signal interference. Reset Beats and ensure TV Bluetooth supports A2DP/AVRCP protocols.
First, verify Bluetooth version compatibility—TVs using Bluetooth 4.0+ work with most Beats models. If pairing fails, power-cycle both devices and retry. Beyond technical glitches, microwave ovens or Wi-Fi routers near the TV can disrupt 2.4GHz signals. For example, a Beats Studio Pro struggling to connect might need a firmware update via the Beats app. Avantree transmitters sidestep these issues with dedicated aptX Low Latency channels.
Avantree Expert Insight
FAQs
Most modern Sony, LG, and Samsung TVs support Beats via Bluetooth. For others, use Avantree transmitters or analog cables.
How do I fix audio delays?Enable game mode on your TV or use Avantree’s aptX-LL transmitters to reduce latency below 40ms—imperceptible to human ears.