CK11-BLU
Wireless handsfree car speakerphone with auto on/off and voice dial
- What's in the box Bluetooth car kit
Car charger
Sun-visor clip
USB charging cable
Quick user guide / User Manual
Top Questions
- How to Connect Two Mobile Devices Simultaneously to CK11
Step 1. Pair the first mobile phone. You can refer to this guide to pair your first phone to the Roadtrip.
Step 2. Set the CK11 into pairing mode again - Press and hold for about 2 seconds until the status LED flashes BLUE and RED alternately. CK11 will disconnect with the first mobile phone.
Step 3. On 2nd mobile phone - Turn on Bluetooth, search and select “Avantree CK11” to connect.
Step 4. Tap “Avantree CK11” on the first mobile phone to reconnect them. And now, the CK11 should be connected to both mobile phones.
Note: If you cannot connect two mobile devices simultaneously to CK11 as above instructions, please check if the Multipoint Function is ON - Press and hold for 3 seconds to turn on the function.
Was this article helpfulStill need help? Please email us at support@avantree.com
Back to Top - How to Connect CK11 with your Mobile Phone
Step 1. Power on CK11 by setting the toggle switch to ON.
Step 2. Press and hold the MFB for 3 seconds until LED indicators flashes BLUE and RED alternately with voice prompts "paring" to enter pairing mode.
Note: Normally on first use when you set the toggle switch to ON, it will automatically enter pairing mode. If not, you may also need to make it into pairing mode by press and hold the MFB button.
Step 3: Connect/Pair CK11 with your mobile phone.
On your phone, locate the Bluetooth settings and make sure that Bluetooth is turned on. Find the headphone/speaker/receiver and select “Avantree **CK11**” to pair them up.
If you can't get it pair with your mobile phone, please try to Factory Reset the CK11 and then try to pair again.
Was this article helpfulStill need help? Please email us at support@avantree.com
Back to Top