Open the Oticon app
Open the latest version of the Oticon app on your phone.
Using Intent? Update to firmware 1.3.0 or newer.
OTICON HEARING AIDS · AURACAST GUIDE
Listen to Auracast broadcasts.
Choose your Oticon hearing aid first. We’ll show the right way to join nearby Auracast audio.
Intent · firmware ≥ 1.3.0
Zeal
Intent users: update to firmware 1.3.0 or newer before starting.
CHOOSE YOUR PATH
Which device are you using?
Select a path to see only the steps that apply to you.
METHOD 1
Using the Oticon app
Use the latest version of the Oticon app.
Tap More Options
Tap the three-dot button at the bottom-right of the app screen.
Tap Auracast broadcast
Choose the Auracast broadcast option from the More menu.
Select a broadcast
Choose the nearby broadcast you want to hear.
Adjust volume
Set the broadcast to a comfortable listening level.
METHOD 2
Use an Auracast receiver
For Oticon hearing aids that cannot join an Auracast broadcast directly.
RECOMMENDED RECEIVER
AuraClip
Use AuraClip to receive the Auracast broadcast, then listen through one of these outputs:
- Wired headphones
- A T-coil neck loop with compatible T-coil hearing aids
METHOD 3
Use Auracast headphones
A simple listening option when direct hearing-aid connection is not available.
Wear over or without hearing aids
You can wear Auracast headphones over your hearing aids, or use them without hearing aids.
Example: Aria Aura.
TROUBLESHOOTING
Common issues
These are the three issue areas called out in the source guide.
01No sound
Open the source FAQ for model-specific checks and support.
02Not hearing clearly
Check the selected broadcast and adjust the broadcast volume in the Oticon app.
03Hearing echo or delay
Open the source FAQ for model-specific checks and support.