Available nowAt home
Use the steps above with a Medley Pebble 2 transmitter.
Pebble Aura · BTHS-TW126R
Hear Bluetooth and Auracast with Pebble Aura
Connect to Bluetooth devices or a Medley Pebble 2 transmitter
Bluetooth + AuracastStart setup
Choose how you want to listen
Connect with Bluetooth
Take both earbuds out of the case.Pairing starts automatically. The LED flashes red and blue.
Not flashing red and blue? Hold the + button on either earbud for 5 seconds.
Open Bluetooth on your device.Select Pebble Aura.
Connected: the LED turns solid blue. Start playing audio.
Connect to Medley Pebble 2
Start pairing on the transmitter.Hold its Mode button for 2 seconds. The LED flashes orange rapidly.
Start Auracast search on either earbud.Hold the − button for 5 seconds. Its LED flashes orange rapidly.
Keep them close.Wait for the connection to complete.
Joined: the earbud LED stays solid orange for 3 seconds, then turns off.
See the Mode and − button actions.
Available nowPublic venues
Joining venue broadcasts requires Pebble Aura support in the Avantree app.
Open and secured broadcasts
These require Pebble Aura support in the Avantree app.
Private Mode
Encrypted Auracast will be added through a Pebble Aura firmware update.
Advanced · Dual Mode
Hear TV audio without missing calls
Connect to the Auracast TV transmitter.
Turn your phone's Bluetooth back on.Wait for Pebble Aura to reconnect.
Incoming call: TV audio pauses. After the call: TV audio resumes.
Fix a problem
Choose what is going wrong
Bluetooth device cannot find Pebble Aura
- Move Pebble Aura close to the phone, computer, or TV.
- Hold the + button on either earbud for 5 seconds.
- Wait for red and blue flashing, then select Pebble Aura.
Expected: the LED becomes solid blue. If it does not, open the full manual or contact support below.
Cannot join the Medley Pebble 2 transmitter
- Hold the transmitter's Mode button for 2 seconds until its LED flashes orange rapidly.
- Hold the − button on either earbud for 5 seconds until the earbud LED flashes orange rapidly.
- Keep the earbuds close to the transmitter.
Expected: the earbud LED turns solid orange for 3 seconds, then turns off. Public and secured broadcasts require the upcoming app feature described above.
Connected, but there is no sound
- Start playback at the source.
- Raise the source and earbud volumes from low levels.
- For Bluetooth, confirm the LED is solid blue. After joining Auracast, the orange LED stays solid for 3 seconds and then turns off.
If the expected indicator does not appear, reconnect using the matching setup path above.
Only one earbud has sound
- Place both earbuds in the charging case.
- Wait a few seconds, then remove both together.
- Reconnect Pebble Aura and start audio.
Expected: both earbuds play. If one side is still silent, contact support below.
Watch TV and answer phone calls
Use Dual Mode. Pair the phone first, then join the TV's Auracast broadcast. Calls pause the broadcast and it resumes afterward.
Need more product help
Open the official Pebble Aura Support page for current FAQ, troubleshooting, accessories, warranty, and firmware destinations.
Reference
Wear, volume, charging, buttons, and indicators
How to wear
Place each ear hook along the contour of your ear.
Follow the ear's curve; do not insert the speaker into the ear canal.
Adjust volume
Press + or − on either earbud. The volume change applies to both earbuds.
Charging
- Use a 5 V, 1–2.4 A USB power source.
- Solid red: charging.
- LED off: fully charged.
- About 2 hours to charge.
- Up to 18 hours playtime.
Connection indicators
- Red + blue flashing: Bluetooth pairing.
- Solid blue: Bluetooth connected.
- Orange flashing: searching for Auracast.
- Solid orange for 3 seconds, then off: Auracast joined.
Full button guide
Open the official Pebble Aura guide for controls, calls, Auracast searching, charging, and indicator behavior.
Open original interactive guide ↗Open PDF guide ↗
Firmware update
Check for Pebble Aura updates
Update only when a feature or Avantree Support requires it
- 1Open the official pageLook for Pebble Aura or BTHS-TW126R.
- 2Confirm an update is listedIf none appears, stop here.
- 3Follow its instructionsKeep the earbuds powered until completion.
Important: install only firmware listed for Pebble Aura / BTHS-TW126R.
Still need help
Get help with Pebble Aura
Send us your issue
A support agent will reply. Include the connected device, symptom, LED pattern, and screenshots.
Submit a ticket →