Aria 90T wireless headphone x 1
DG80 USB dongle x 1
Charging Stand x 1
Detachable boom microphone x 1
Hard travel case x 1
Charging cable x 1
AUX audio cable x1
The Avantree Aria 8090T is a Bluetooth 5.0 Noise Canceling Headset & USB Adapter combo. It features a long boom microphone that’s placed close to your mouth, allowing it to clearly catch and deliver your voice. This headset is perfect for remote working calls on Zoom, Skype, Google Meet, Microsoft Teams and more.
Plug & Go, Universally Compatible
Purchased a different USB dongle and had to go through some complicated driver installation? No worries, the Aria 8090T wireless set does NOT require any driver; simply plug the adapter into your USB port, power the headphones on and go. It works with any Windows, Mac, Chromebook and Linux PC that inputs/outputs audio through USB port.
Know what you Sound Like
Not sure if other people on the call can hear your voice properly? That’s alright; the “Sidetone” feature of Aria 8090T headphone lets you hear your own voice through the microphone WHILE you’re speaking, so you’d know instantly if you accidentally muted yourself or if your voice is not loud/clear enough.
Stable & Reliable Signal Quality
The Avantree 8090T uses Bluetooth v5.0, ensuring stable & reliable connectivity up to 33 ft (10 m) between the dongle & the headphone. Need to grab a drink from the fridge or take a bathroom break? No problem, do what you need to do, the connection will not break. Note: Actual range can be affected by both physical & wireless interference.
Never Miss a Call on Your Phone
Have the Bluetooth headphones connect to your Phone AND the Adapter at the same time. Want to enjoy gaming but worried that you might miss an important call? Not to worry, the “Multi-Point Connection” feature of Avantree 8090T will auto-switch onto your mobile device when a call comes in, so you’ll never miss anything.
Active Noise Cancellation
Like all other Aria Series headphones, the 8090T features advanced built-in Active Noise Cancellation technology. When used in environments filled with low frequency ambient noises such as Air Travel, Subway and Bus Commutes, the ANC technology can block the noise out, giving you more peace & quietness.
Convenient Charging & Storage
The battery of the 8090T headphones can last up to 24 hours per full charge, more than enough for a full day of usage. When you do need to charge it, simply place it back onto the charging stand, it’ll be charged and ready in a couple of hours. The stand also dubs as perfect storage solution, helping you save some extra space on your workstation.
Use it as an aptX-HD Music Headphone
The headphone in Aria 8090T set can be used independently. Easily remove the detachable mic, pair the headphone with your phone and enjoy a Hi-Def music session on your way to work. When a call comes in, simply plug the mic back, click the convenient “pick-up” button on the headphone, and speak away. Don’t even need to take your phone out!
Lighter & More Comfortable
The Avantree Aria headphone only weighs 8 oz /220g – much lighter than other Noise Cancelling headphones on the market (usually more than 10 oz/280 g), which means that there’ll be less pressure on your head. What’s more, the memory foam earpads are replaceable so you’ll always be able to keep them new & comfy!
Bluetooth 5.0 Noise Cancelling Headphones with Detachable Mic and USB Dongle Adapter Set for Conference Call Meetings on Skype, Zoom, MS Teams, Google Meet and more.
Before you start, please ensure your boom microphone is NOT muted. RED dot = muted / No RED dot = unmuted.
If the Microphone does not work well, please start with a diagnostic test with your cellphone first. If it works well with your cellphone, but not with computer, it might be a driver or settings issue. Please continue troubleshooting:
Step 1: Check if the headphone is connected via both voice and music. Go into your Bluetooth menu and see if it shows connected both "voice" and "music", if you can not see "voice", you might not be able to use the microphone, please delete the paired history on your computer, reset the headphone and try to pair them again.
Step 2: Check your computer sound settings. Visit your Sound Settings tab and make sure the Avantree headphone is chosen as the input and output device:
Step 3: Check the meeting Software Sound / Audio Settings. If you're using a meeting software such as Skype or Zoom, please also check the Audio & Video Settings within the software and make sure the Microphone input device and the Speaker out device are choosen as the Avantree headphone:
Important Tip: Please make sure that you closed all other similar apps that might be using your microphone, like Face Time.
Here are some more troubleshooting steps you can try to fix the issue:
Make sure ALL other audio APPS are completely CLOSED. Do not use more than one AUDIO APP at the same time. Your Windows system might get confused (Most issues are here).
If you are using more than one monitor, make sure you plug the USB into the DOCK rather than into one of the monitors.
Make sure you turn off any other devices that previously paired and connected with your headphones via Bluetooth.
Try to RESTART your computer and try again in case the computer's input / output audio settings got confused.
The following links can also be helpful if you have similar situation: - The microphone stops working randomly. Please go to this link; - The connection is not available or unstable that you hear noise or your voice is cutting out and sound quality is bad on a call, please go to this link.
Note: If you are having trouble with your Bluetooth Headphones' Microphone while connected via your Computer or Laptop's built-in Bluetooth, we recommend trying our DG10 Bluetooth Dongle. It's plug-and-play with no driver installation required, making connecting a breeze.
Normally, once the dongle and headphone are powered ON and within the recommended range (30 meters /100 feet, line-of-sight) they should auto-connect within 10s. If this is not the case, please follow the below instructions to factory reset both the AS90T and DG80, then reconnect and lock the connection.
After the two devices are successfully connected, please press the DG80 MFB twice - its LED will flash BLUE 5 times quickly, indicating that the devices are locked.